Discussion on the Main Components of Biogas Flare System
Discussion on the Main Components of Biogas Flare System
The biogas flare system is also known as the biogas release ignition device. The use of the biogas flare can fundamentally prevent the biogas gas from being directly discharged into the atmosphere. It uses the programmable controller to realize the automatic control of the combustion of the release system. Through the system pipeline, valve, instrument, and burner, it can realize the dehydration of excess gas, release ignition, and combustion, and control the flow rate, pressure, and temperature of the gas during the discharge process, Making the harmful gas fully burned, cracked and discharged up to standard during the release process.
Main components of biogas flare system: biogas flare is composed of a combustion chamber, ignition and flame detection system, PLC control cabinet, and other main components. The biogas flare system adopts a large fully enclosed steel structure with a straight ceramic temperature-resistant module. The flared body is made of 304 stainless steel, and the combustion chamber is made of double-layer stainless steel or ceramic fiber.
The biogas flare control cabinet is equipped with Siemens PLC system, which can realize the ignition of the gas tank position, automatic pressure ignition, remote central control ignition, on-site manual ignition, and on-site emergency stop; Above, the flare burning, valve opening, fault, and other operation signals are transmitted to the upper central control room; The fault signal can be relieved on-site or restarted remotely.
The biogas flare system is a combustion equipment that releases biogas into the air after full combustion. According to the characteristics of biogas combustion, it effectively solves various problems in the aspect of biogas combustion and is widely used in the places where biogas is discharged into the air in various industries.