How Long Should the Controller be Turned Off After Stopping the Steam Boiler Burner?
How Long Should the Controller be Turned Off After Stopping the Steam Boiler Burner?
In recent years, the National Environmental Protection Department and local environmental protection bureaus have been strict in their work on air pollution prevention and control, and the standards have become stricter and stricter. Enterprises, as the main body of pollution prevention and control, have also been included in strict environmental protection management. This year’s Two Sessions Report of the State Council again clearly proposed the goal of reducing the emissions of sulfur dioxide and nitrogen oxides by 3% this year. For enterprises, strengthening pollution prevention and control and promoting green development is the only way for them to continue to develop in a sustainable and healthy way in the future, and there is no shortcut on this road.
How long should the controller be turned off after stopping the steam boiler burner? Bed pressure is an important parameter monitored in CFB boilers, which is an important index for monitoring bed fluidization quality and layer thickness. 2) Adjust the driving speed of the slag remover motor to achieve a dynamic balance between the slagging in the furnace and the slagging in the slag remover.
Gas steam boilers are devices that use natural gas, liquefied petroleum gas, city gas, etc. as fuel, and burn the heat released to heat the water in the boiler and turn it into steam. Steam generated by water is a heat transfer device that converts heat energy into steam energy. Water is constantly heated by gas in the boiler (boiler drum) to a high temperature and produces pressurized steam. As the boiling point of water increases with pressure, the steam is pressurized and generates heat energy. In a strict sense, steam generated by a boiler is water that has been heated to a saturated water temperature by a boiler and then vaporized. As a kind of energy, it is widely used.
The WNS series of gas steam boilers has become a member of the boiler room of many enterprises and institutions with its safe and efficient characteristics and has gained a good reputation in the industry. This gas boiler has a compact structure, stable and reliable operation, and is equipped with a control and alarm system for boiler water level and steam pressure, as well as interlocks to ensure the safe and reliable operation of the boiler. In addition, the WNS series gas boiler has a large-diameter spiral furnace barrel and a high-efficiency heat transfer tube with a corrugated shape, which increases the heating surface of the boiler and cooperates with the tail of the chimney to reduce the exhaust gas loss and increases the thermal efficiency of the boiler to above 98%, helping customers to achieve the goal of energy conservation and emission reduction.
How long should the controller be turned off after stopping the steam boiler burner? After modification and addition of environmental protection equipment to coal-fired boilers, they can basically meet the requirements of users for boiler output and environmental protection. However, this is not the best way to burn biomass pellets, and the industrialization level of biomass raw material collection, transportation, and processing is still not high. There is still a long way to go for the use of biomass in China.