Introduction to the Daily Maintenance Instructions of the Full Premixed Low Nitrogen Burner
Introduction to the Daily Maintenance Instructions of the Full Premixed Low Nitrogen Burner
The daily maintenance of the fully premixed surface burner is very important. When using the burner, the maintenance of the burner is related to the service life of the burner. Regular maintenance can prolong the service life of the burner. Today, I will show you about gas combustion. How to maintain the machine daily.
Main gas source – For burners using natural gas as fuel, check the main gas source regulating valve to ensure that the circuit is in good condition. If there is an inductive circuit, check it for damage.
Filter – If a “y” type filter is installed before the control valve, it must be cleaned. Full-premixed surface burner.
Control regulating valve – check the control regulating valve on the gas burner to see if the adjusting bolt is easy to adjust. Make sure that all sockets and screens are not blocked.
Full premixed surface burner – check the gas pipeline group to confirm whether the manual switch is sensitive and the valve handle is installed. Check whether the barometer works normally. When adjusting the gas burner, an accurate pressure display is crucial. Rotate the low and high-voltage switches to confirm their operating conditions. The connection of the air valve needs cleaning and lubrication. If the connection is too sticky or rough, replace it with a suitable accessory. If the burner is equipped with removable pipes, it should also be cleaned.
A full premixed surface burner is an important part of asphalt mixing equipment. The combustion effect of the burner is related to the dryness of the aggregate, fuel consumption rate, dust collection bag, and the safety of equipment and personnel. Let’s take a look at the working process and troubleshooting of the burner.
The main fuel of the fully premixed surface burner is natural gas, liquefied petroleum gas, urban gas, and other combustible gases. These fuels are flammable and explosive dangerous gases. Pay attention to safety during use and storage, or major safety accidents will occur.