Points for Installing a Ring-Shaped Heating Furnace Burner
Points for Installing a Ring-Shaped Heating Furnace Burner
It is important to use a proper burner and combustion system for the industrial furnace, and installing a ring-shaped heating furnace burner can be challenging. Here are some points to consider when installing a ring-shaped heating furnace burner:
A ring-shaped heating furnace burner can be installed on the top or side walls of the furnace.
The distance between burners should be determined based on the process requirements and the performance of the burner, usually 1-2 meters.
For furnaces with a large bottom area and short hear, multiple rows of burners can be installed on the top wall of the heart. As long as the distance between burners is close to the fire radius, the direction of the air jet can be arbitrary.
When the heart wall is thick, the gas pipeline can be extended into the brickwork to delay the mixing of combustion. The gas pipeline should be made of refractory steel.
When installing the burner on the top wall of the hear, consider insulation and thermal expansion. Flexible pipes and expansion joints should be used for air and gas connections.