EBICO News

The usage process of steam generator
Before using steam generator equipment, in order to ensure its working condition, in addition to paying attention to the quality of the equipment, it is also necessary to master the correct operating methods and precautions.
1. Before using the steam generator, it is necessary to carefully read the boiler user manual to ensure proper use and maintenance of the equipment. Check the water tank to ensure that there are no debris inside, otherwise the water pump may be damaged or the check valve may get stuck.
2. Before daily operation, the steam valve must be opened, and then the drain valve must be opened until all water and dirt in the furnace are completely drained.
3. When installing the piping of a steam generator, factors such as preventing backflow of heated materials and discharge of condensed water from the piping must be considered.
4. Close the filter valve, but the steam safety valve remains open. Turn on the main power switch of the air conditioning evaporator, and a low water alarm will be triggered. The inlet valve will operate to replenish water and moisture to the air conditioning evaporator until the water level in the furnace exceeds the minimum level, and stop replenishing water.
5. When the evaporator enters normal operation, the steam valve can be closed, and the evaporator begins to slowly increase pressure. When the steam pressure rises to the set pressure, the heating automatically stops. At this point, steam can be used normally.
6. The evaporator should be drained at least once a day. After the operation is completed, the power should be disconnected for 15 minutes and the pressure should drop by 0.05Mpa before draining. Attention should be paid to prevent burns during draining.
7. Check twice a day whether the time for water treatment is consistent with the actual time, otherwise adjustments should be made. Once the time for adding salt to the salt box is set, it must be strictly added according to the regulations.