What are the precautions for using natural gas burners?
What are the precautions for using natural gas burners?
What are the precautions for using natural gas burners? I believe many companies also have certain doubts about this, because natural gas burners are different from other environmentally friendly machinery and equipment. Firstly, it is necessary to understand the concerns before selecting a product, so as to relieve their worries. Secondly, for the safety of employees and the company. So today, let’s learn about it together.
The operating environment temperature of the combustion engine should not exceed 70 ℃, otherwise cooling and insulation measures should be taken. When used in colder regions, appropriate insulation measures should be taken for the oil storage device and the supply and return oil pipeline system to prevent blockage of the oil pipeline due to freezing. Furthermore, the control circuit of the combustion engine must not be affected by moisture or high temperature. Please turn off the combustion engine when cleaning the chimney.
The size of the air damper should match the specifications of the nozzle. During the use of the combustion engine, due to the inconsistency between the boiler and the combustion engine during factory testing, it is necessary to adjust the air damper appropriately. Sometimes, it is also necessary to replace the oil nozzle with the appropriate specifications and injection angle to ensure the progress of production.
Before starting the combustion engine, check if the fuel in the fuel tank is sufficient. The oil system needs to be carefully inspected to prevent any oil or gas leaks. Before refueling the fuel tank, the combustion engine must be turned off. The fuel must be filtered before being injected into the tank, and it can only be restarted after 20 minutes of refueling. The suction pipe should be kept at a distance of 80-120mm from the bottom of the fuel tank.
Before performing these operations, the first thing we need to do is to connect the peripheral circuits and follow the wiring diagram of the control system to achieve automatic control of boiler temperature, pressure, water level, etc. Then, we can proceed with subsequent operations in the near future.