What Are The Reasons For The Increased Fuel Consumption Of The Fuel Burner?
What Are The Reasons For The Increased Fuel Consumption Of The Fuel Burner?
When we use the oil burner for a long time, we will feel that fuel consumption increases. In fact, the increase in the fuel may be caused not only by internal problems with equipment but also by our operation. There are three reasons for the increase in fuel consumption. The following is a simple understanding.
1. The machine efficiency is reduced. When using the recorder, we usually use it only after the first debugging and do not often repair and debug it. This may lead to too-small bottom wind, uneven bottom wind, and excessive, too-large, or too-small secondary air-induced wind, which may lead to the decline of machine efficiency. If all these are OK, you can also check whether the vent is blocked. If so, you should go there regularly. The cleaning and blockage of vents may also reduce the efficiency of the machine, and the extreme reduction of efficiency may lead to increased fuel consumption.
2. The fuel itself can be considered from several aspects, such as the calorific value, density, moisture, and packaging of the fuel you are using. If your fuel is nonpure wood chips, the combustion value of the particles will be too low and the density will not be enough. This may be because the particles you use contain sand, glue, and talc, which may increase the consumption of the burner, and reducing the fuel efficiency will increase the fuel consumption.
3. The operating conditions of the oil burner have changed, and the operating conditions of the application equipment have generally changed in three aspects. The first is the change in temperature, the second is the decline of equipment efficiency, and the third is the increase in output. These are all possibilities for increased fuel consumption. The biggest reason.
The oil burner follows the principle of energy conservation and emission reduction and makes contributions to environmental protection. If the fuel is increased, the first will cause waste, and the second will increase the cost of products, which is a waste for enterprises and does not achieve energy conservation.