What is the equipment of a 30mg low nitrogen combustion engine?
What is the equipment of a 30mg low nitrogen combustion engine?
In recent years, with the strengthening of national environmental protection efforts, various provinces and cities have been carrying out burner renovation and upgrading in accordance with government requirements at different times. In the combustion equipment industry, the two popular combustion equipment are low nitrogen combustion engines and ultra-low nitrogen combustion engines. The components used in these two combustion equipment are the same, but the quality and grade of the components inside are different.
Ultra low combustion engine refers to a burner with low NOx emissions during fuel combustion. Ox emissions at 30mg/m ³ The following are commonly referred to as ultra-low nitrogen burners. Traditional natural gas boiler burners typically emit NOx emissions ranging from 120 to 150mg/m ³ Left and right. Low nitrogen burners typically emit NOx at 30-80mg/m ³ Left and right. NOx emissions at 30mg/m ³ The following are commonly referred to as ultra-low nitrogen burners.
Low nitrogen burners utilize the advantages of gas burners, such as easy ignition, complete combustion, stable flame, good spreading, no flashback, no misfire, large adjustment range, low noise, long service life, safety and reliability, due to their reasonable structural design.
Structural composition of 30mg low nitrogen combustion engine:
1. Air supply system: The function of the air supply system is to send a certain amount of air with a certain wind speed and volume into the combustion chamber. Its main components include: shell, fan motor, fan impeller, gun fire pipe, air door controller, air door baffle, and diffusion plate.
2. Ignition system: The function of the ignition system is to ignite a mixture of air and fuel, and its main components include: ignition transformer, ignition electrode, and high-voltage electric fire cable.
3. Detection system: The function of the monitoring system is to ensure the safe operation of the burner, and its main component is the flame monitor.
4. Fuel system: The function of the fuel system is to ensure the fuel required for combustion of the burner. The fuel system of a fuel burner mainly includes oil pipes and fittings, oil pumps, solenoid valves, nozzles, and filters.
5. Electric control system: The electric control system is the command center and contact center of the above systems, with the main control component being a programmable controller. Different programmable controllers are equipped for different burners. Common programmable controllers include LFL series, LAL series, LOA series, and LGB series, with the main difference being the timing of each program step.