Where are the Most Susceptible Areas of Wear and Tear on the Equipment of a Stabilized Soil Mixing Station?
Where are the Most Susceptible Areas of Wear and Tear on the Equipment of a Stabilized Soil Mixing Station?
Stabilized soil mixing station equipment is widely used in small and medium-sized road construction, which improves the construction efficiency of roads in various regions. However, the long-term use of mixing equipment can cause varying degrees of wear on the equipment, which affects the quality and efficiency of the equipment in later work. Typically, we perform regular maintenance and maintenance work on the equipment. However, the maintenance and maintenance work of the wearable parts of the equipment is often overlooked by maintenance personnel, resulting in more serious wear and tear in the later stage of the equipment. So, where are the most susceptible areas of wear and tear on the equipment of a stabilized soil mixing station?
Firstly, the most susceptible area of wear and tear on the equipment of a stabilized soil mixing station is the mixing blade of the mixing machine equipment. Due to the long-term underground operation of the mixing blade, the wear rate of the blade increases. If the replacement of the mixing blade is not timely, it will lead to a decrease in construction efficiency or low quality of construction in later work.
Secondly, the mixing shaft is also the most susceptible to wear and tear, because a large amount of dust is generated by the mixing machine equipment during work, causing the lubricating oil on the mixing shaft to be contaminated by dust, and thus accelerating the wear rate of the mixing shaft. Therefore, regular lubrication of the mixing shaft is also very important.
Thirdly, the transmission device of the stabilized soil mixing station may also experience excessive working pressure when the mixing machine equipment is working under high pressure, resulting in wear and tear.
When maintaining a stabilized soil mixing station, only by doing a good job in the maintenance and maintenance work of the wearable parts of the equipment can accidents be reduced during work.