Which is better, steam generator or steam boiler
Which is better, steam generator or steam boiler
1. The steam boiler has good quality and sufficient output
The steam in the steam generator has high moisture content, poor quality, and insufficient heat utilization. The steam boiler drum is equipped with a steam water separator, which can play a role in steam water separation and steam purification, effectively ensuring steam quality.
2. Steam boilers are suitable for industrial uninterrupted steam use
The steam generator has a simple structure, small water volume, and fast steam production, while the steam boiler has a large water volume, sufficient output, strong load adaptability, and long-term stability. operation. Under the same displacement, steam generators are more suitable for small and medium-sized users who intermittently use steam for steaming tofu, ironing clothes, and other purposes. Most industrial enterprises such as chemical, printing and dyeing, food, and heating require continuous and uninterrupted consumption of steam, so it is more suitable to choose steam boilers that can operate stably for a long time.
3. Low cost of steam boiler water treatment
Steam generators have high requirements for water quality and must meet pure water standards. This means that the investment cost and operating cost of steam generator water treatment are high. The pipe burst cannot be repaired, and the entire boiler is scrapped.
Steam boilers have lower requirements for water quality. Referring to the GB1576-2008 industrial boiler water quality standard, water softening technology or resin filters are generally used.
4. Large capacity range of steam boilers
The capacity range of the steam generator is small, with an evaporation capacity of around 0.5T. It is generally configured in a modular manner and is commonly used in production and daily life where steam consumption is required to be less than 0.5 tons or heat generation is required, with a value of less than 300000 kcal.
Steam boilers have a large capacity range, reaching over 160T, and are suitable for various industries such as heating, electricity, and chemical engineering.
Therefore, if you have boiler requirements, we recommend that you carefully choose your boiler manufacturer. There are many boiler manufacturers, but not many have good qualifications, and even fewer have A-level boiler qualifications. Moreover, boilers from large manufacturers are guaranteed, and some common boiler problems can be avoided, resulting in higher cost-effectiveness.